VAX Steam Fresh CDST-SFXS handleiding
Handleiding
Je bekijkt pagina 13 van 20
13
+
Using the tools
Concentration nozzle
Flat surface tool
The concentration nozzle can be used with the following tools:
The flat surface tool must be attached to the
concentration nozzle to use with the following tools:
To attach the tools to the concentration nozzle line up the arrows and twist the tool clockwise
until locked into position and secure. Turn anti-clockwise to remove.
To attach the flat surface attachment to the concentration nozzle line up the arrows and twist the
tool clockwise until locked into position and secure. Turn anti-clockwise to remove.
To attach a scrub brush, line the tab on the bottom of the
flat plate with the bottom of the brush/attachment and click
back into place.
To use the steam pads, attach the scrub pad attachment to
the flat surface tool. Line the tab on the bottom of the scrub
pad attachment and click back into place.
Stretch the elasticated pad
over the tool. Make sure the
pad covers the whole tool
before use.
To remove the scrub pad
attachment, push the clip
on the top to release.
To remove the scrub brush
push the clip on the top to
release.
Bekijk gratis de handleiding van VAX Steam Fresh CDST-SFXS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VAX |
| Model | Steam Fresh CDST-SFXS |
| Categorie | Stoomreiniger |
| Taal | Nederlands |
| Grootte | 3806 MB |
