VAX CLSV-HP handleiding
Handleiding
Je bekijkt pagina 9 van 20
9
Using your machine
Operation
WARNING: The brushbar in the floorhead and motorised pet tool constantly rotates. Never use the
floorhead on one spot for an extended period of time as the brushbar may damage the surface.
If there is a blockage, or the brushbar in the floorhead or motorised pet tool is obstructed, the
brushbar motor protection sensor may activate. The brushbar will stop, the on/off power button
will flash, and the machine will switch off. To reset, first remove the tool from the flexi clean pole or
handheld and clear any obstruction. Wait 1 minute before refitting the tool. Switch the machine on.
If the power button still flashes check the filter or for blockages.
Slide the battery into the
machine until it clicks
into place.
Press the power on/off
button to switch the
machine on. When the
floorhead or motorised
pet tool is attached the
brushbar will turn.
Place your foot on the
floorhead. Pull the handle
backwards to recline.
The battery level indicator
will illuminate white to show
the remaining runtime.
For particularly dusty areas
press the + boost button to
increase the suction.
The + boost button will
illuminate. Press the + boost
button again to deactivate.
When less than 20%
charge is remaining the
indicator light will flash
indicating the battery is
running low.
To remove the battery
press both the buttons
to release.
Bekijk gratis de handleiding van VAX CLSV-HP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VAX |
| Model | CLSV-HP |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3983 MB |