VAX CLSV-HP handleiding
Handleiding
Je bekijkt pagina 7 van 20
7
IMPORTANT: Always store the machine in the wall mount. Never leave the machine in the self-stand
position for long periods or when unattended.
Getting started
Assembly
Attaching the wall mount
Push the flexi clean pole
into the floorhead until it
clicks.
Without the handheld
attached to the flexi clean
pole and floorhead, push
the wall mount onto the
top and back of the flexi
clean pole.
Attach the handheld to the
flexi clean pole until it clicks
into position.
Choose a location for the
machine to be stored.
Stand the floorhead and
flexi clean pole against
the wall. Make sure the
floorhead is flat on the
floor. Do not hang.
Holding the wall mount
securely against the wall,
make a small mark for each
screw. Remove the pole
from the wall mount before
fixing to the wall.
Slide the flexi clean pole
release down to lock
the pole into the straight
position.
Fully assemble the
machine and firmly press
the machine into the wall
mount to secure. Always
ensure the machine is
securely locked into place.
Lock the floorhead into
the self-stand position
before storing it in the wall
mount and always store
the machine with the flexi
clean pole straight.
Secure the wall mount to the wall using the wall
plugs and screws. For a ‘screw free’ option use two
adhesive mounting strips (not included) attached to
the back of the wall mount. Make sure the wall mount
is secured to the wall before use.
Bekijk gratis de handleiding van VAX CLSV-HP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VAX |
| Model | CLSV-HP |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3983 MB |