Varytec Retro Blinder TRI 380 handleiding

Niet gecategoriseerd

Varytec

48 pagina's

PDF beschikbaar

Handleiding

This operating mode can only be activated when the device is operating in stand-alone mode

or as master in a master / slave combination. This setting is only relevant if the device is not

controlled via DMX.

1. Press [MENU] repeatedly until ‘Mode’ appears on the display.

2. Conrm with [ENTER].

3. Use [UP] and [DOWN] to select the ‘Auto’ menu item.

4. Conrm with [ENTER].

Automatic mode is activated.

5. Press [MENU] repeatedly until ‘Speed’ appears on the display.

6. Conrm with [ENTER].

7. Use [UP] and [DOWN] to select the desired running speed ‘Slow’ or ‘Quick’ for automatic

mode.

8. Conrm with [ENTER].

The chosen running speed is saved.

9. To enable automatic mode only for the COB LEDs, press [MENU] repeatedly until the dis‐

play shows ‘Backlight’ .

10. Conrm with [ENTER].

11. Use [UP] and [DOWN] to select the ‘Auto’ menu item.

12. Conrm with [ENTER].

Automatic mode for the COB LEDs is activated.

Automatic mode

Operation

Retro Blinder TRI 380

Blinder

Bekijk gratis de handleiding van Varytec Retro Blinder TRI 380, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.