Varytec Retro Blinder OCTO 180 handleiding
Handleiding
Je bekijkt pagina 15 van 44
NOTICE!
Risk of overheating and re due to inadequate distance and bad ventilation!
If the distance between the light source and the illuminated surface is too short or
the device is badly ventilated, the device can overheat and cause res.
Make sure that illuminated surfaces are more than 2 m away.
Do not operate the device in ambient temperatures above 40 °C.
Always ensure sucient ventilation at the operating location.
NOTICE!
Data transfer errors due to improper wiring!
If the DMX connections are wired incorrectly, this can cause errors during the data
transfer.
Do not connect the DMX input and output to audio devices, e.g. mixers or ampli‐
ers.
Use special DMX cables for the wiring instead of normal microphone cables.
You can install the device in hanging or standing positions. When in use, the device must
always be attached to a solid surface or an approved mount. Attach using the openings pro‐
vided on the mounting bracket.
Mounting options
Installation
Retro Blinder OCTO 180
15
Blinder
Bekijk gratis de handleiding van Varytec Retro Blinder OCTO 180, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Varytec |
| Model | Retro Blinder OCTO 180 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2503 MB |
