Varytec Hero Pixel Wash 760FX handleiding

Verlichting

Varytec

32 pagina's

PDF beschikbaar

Handleiding

4 Installation

Unpack and check carefully there is no transportation damage before using the unit.

Keep the equipment packaging. To fully protect the product against vibration, dust

and moisture during transportation or storage use the original packaging or your

own packaging material suitable for transport or storage, respectively.

Lift the device only at the base. When lifted at the rotatable mounting, the device

may be damaged.

You can install the device standing or hanging. When in use, the device must be

mounted at a solid surface or clamped to an approved truss.

Work from a stable platform whenever you install or move the device or when you

perform any kind of maintenance. Block access under the work area.

WARNING!

Risk of injury caused by falling due to unsuitable trusses and other

xtures!

If trusses or other xtures are not designed for the weight of the

intended number of moving heads, falling can cause severe injury and

considerable damage.

Before mounting, ensure that the load capacity of trusses and other x‐

tures is sucient for the intended number of devices. Take into account

any additional load that aects the load bearing parts due to the move‐

ment of the head.

When installing and operating, make sure to follow the standards and

regulations that apply in your country.

Always secure devices with a secondary safety attachment, such as a

safety cable or a safety chain.

NOTICE!

Risk of overheating and re due to inadequate distance and bad

ventilation!

If the distance between the light source and the illuminated surface is

too short or the device is badly ventilated, the device can overheat and

cause res.

Make sure that illuminated surfaces are more than 2 m away.

Do not operate the device in ambient temperatures above 40 °C.

Always ensure sucient ventilation at the operating location.

NOTICE!

Data transfer errors due to improper wiring!

If the DMX connections are wired incorrectly, this can cause errors

during the data transfer.

Do not connect the DMX input and output to audio devices, e.g. mixers

or ampliers.

Use special DMX cables for the wiring instead of normal microphone

cables.

Installation

Hero Pixel Wash 760FX

Moving Head

Bekijk gratis de handleiding van Varytec Hero Pixel Wash 760FX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.