Varytec Hero Pixel Wash 760FX handleiding

Verlichting

Varytec

32 pagina's

PDF beschikbaar

Handleiding

10 Troubleshooting

NOTICE!

Data transfer errors due to improper wiring!

If the DMX connections are wired incorrectly, this can cause errors

during the data transfer.

Do not connect the DMX input and output to audio devices, e.g. mixers

or ampliers.

Use special DMX cables for the wiring instead of normal microphone

cables.

In the following we list a few common problems that may occur during operation.

We give you some suggestions for easy troubleshooting:

Symptom Remedy

The unit does not work, no

light, the fan does not run

Check the mains power connection and the main

fuse.

No response to the DMX con‐

troller

1. The DMX indicator should light up. If it doesn't,

check DMX connectors and cables for proper con‐

nection.

2. If the DMX indicator lights up but with no

response, check the address settings and DMX

polarity.

3. Try using another DMX controller.

4. Check whether the DMX cables lie near or adja‐

cent to high voltage cables, which could cause

damage or interference with a DMX interface cir‐

cuit.

If the procedures recommended above do not succeed, please contact our Service

Center. You can nd the contact information at www.thomann.de.

Troubleshooting

Hero Pixel Wash 760FX

Moving Head

Bekijk gratis de handleiding van Varytec Hero Pixel Wash 760FX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.