Varytec Bull 200 IP handleiding
Handleiding
Je bekijkt pagina 27 van 48
7.2.5 Constant colours and colour macros
This setting can only be made when the device is operating in stand alone mode or as master
in a master / slave combination. This setting is only relevant if the device is not controlled via a
DMX controller.
1. Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘Mode’ . Conrm with [ENTER].
3. Press [UP] or [DOWN] repeatedly until the display shows ‘Static’ . Conrm with [ENTER].
4. Use [UP] or [DOWN] to select an eect, a colour or a colour macro that you can adjust
individually. Conrm with [ENTER].
Menu level 3 Menu level 4 Meaning
‘Dimmer’ ‘000’ … ‘255’ Dimmer intensity from dark (0) to bright (255)
‘Strobe’ ‘000’ … ‘255’ Strobe eect, increasing speed
‘C-Macro’ ‘0’ … ‘9’ Colour macros
‘Red’ ‘000’ … ‘255’ Dimmer intensity red from dark (0) to bright (255)
‘Green’ ‘000’ … ‘255’ Dimmer intensity green from dark (0) to bright
(255)
‘ Blue’ ‘000’ … ‘255’ Dimmer intensity blue from dark (0) to bright (255)
‘White’ ‘000’ …‘255’ Dimmer intensity white from dark (0) to bright
(255)
Operating
Bull 200 IP
27
LED Spotlight
Bekijk gratis de handleiding van Varytec Bull 200 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Varytec |
| Model | Bull 200 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2926 MB |
