Varytec bat.PAR V2 RGBWW handleiding
Handleiding
Je bekijkt pagina 72 van 80
Symptom Remedy
The device is not working, no light 1. Check the mains connection.
2. Check the battery charge state.
Device is apparently not working
despite a proper power supply
Check if the device is in DMX mode or in “slave” mode. If
so, check the device in another mode.
No response to the DMX con‐
troller
1. Check whether the DMX controller is switched on.
Check the DMX connections and cables for proper con‐
nection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interfer‐
ence to a DMX interface circuit.
Unintended light eects Make sure that the DMX channel assignments of the
devices do not overlap, and that the DMX start address
of devices with independent control is always higher by
the number of channels that have been set for the DMX
mode on another device.
If the procedures recommended above do not succeed, please contact our Service Center. You
can nd the contact information at www.thomann.de.
Troubleshooting
72
bat.PAR V2 RGBWW, bat.PAR V2 RGBAM
LED Spotlight
Bekijk gratis de handleiding van Varytec bat.PAR V2 RGBWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Varytec |
| Model | bat.PAR V2 RGBWW |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4890 MB |
