Varytec bat.PAR V2 RGBWW handleiding
Handleiding
Je bekijkt pagina 38 van 80
7.7 Sound control
1. Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘SOUND MODE’ . Conrm with
[ENTER].
3. Press [UP] or [DOWN] repeatedly until the display shows ‘SOUND’ . Conrm with [ENTER].
4. Use [UP] or [DOWN] to select a sound-controlled programme between ‘Sound1’ and
‘Sound7’ (item no. 613587)/ ‘Sound10’ (item no. 580501). Conrm with [ENTER].
This setting is only relevant if the device is not controlled via DMX. The device can operate in
stand-alone mode or control connected devices of the same type, that must be congured as
slaves. The automatic show can only be activated on the master device.
Selecting a sound-controlled
programme
Operating
38
bat.PAR V2 RGBWW, bat.PAR V2 RGBAM
LED Spotlight
Bekijk gratis de handleiding van Varytec bat.PAR V2 RGBWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Varytec |
| Model | bat.PAR V2 RGBWW |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4890 MB |
