VARI-LITE VL800 EventProfile handleiding
Handleiding
Je bekijkt pagina 33 van 38
UsEr manUaL
www.Vari-LitE.com
VL800 EVEntprofiLE
33
FIXTUre
To select Fixture, press the ENTER button to confirm, use the UP/DOWN button to select Status, ReCal (Fixture),
Reboot Fixture, Version, Fixture Hours, Cross load (Software) or Service.
Status
Select Status, press the ENTER button to confirm, (No Errors... or displays a list of errors) will show on the dis-
play, press the MENU button back to exit.
Recal (Fixture)
Select Recal (Fixture), press the ENTER button to confirm, Are you sure? will show on the display, press the EN-
TER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Reboot Fixture
Select Reboot Fixture, press the ENTER button to confirm, Are you sure? will show on the display, press the EN-
TER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Version
Select Version, press the ENTER button to confirm, version will show on the display, press the MENU button
back to exit.
Fixture Hours
Select Fixture Hours, press the ENTER button to confirm, fixture hours will show on the display, press the MENU
button back to exit.
Cross load (Software)
Select Cross load (Software), press the ENTER button to confirm, Send will show on the display, press the EN-
TER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Service
To select Service, press the ENTER button to confirm. Use the UP/DOWN button to select Service Settings or
Diagnostics, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Service Settings
Select Service Settings, press the ENTER button to go into Password access only, press ENTER to key password
2606 to confirm. Use the UP/DOWN button to select Set Position Cal, Color Oset, Gobo Oset, Optics Oset
or Beam Oset, press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
Set Position Cal
Select Set Position Cal press the ENTER button to confirm. Use the UP/DOWN button to select Pan, Tilt, Re.
Pos. Oset or ReCal Position, then use the UP/DOWN button to adjust the value for Pan or Tilt, press the ENTER
button to store, the fixture will run as the channel value indicates and to select No or Yes for Re. Pos. Oset or
ReCal Position. Press the MENU button back to the last menu or exit menu mode idling one minute.
Color Offset
Select Color Oset press the ENTER button to confirm. Use the UP/DOWN button to select Cyan, Yellow, Ma-
genta, CTO, Color Wheel, Reset Color Oset or ReCal Color, then use the UP/DOWN button to adjust the value
for Cyan, Yellow, Magenta, CTO or Color Wheel, press the ENTER button to store, the fixture will run as the
channel value indicates and to select No or Yes for Reset Color Oset or ReCal Color. Press the MENU button
back to the last menu or exit menu mode idling one minute.
Gobo Offset
Select Gobo Oset press the ENTER button to confirm. Use the UP/DOWN button to select Gobo 1 Wheel, Gobo
1 Rot, Gobo2 Wheel, Reset Gobo Oset or ReCal Gobo, then use the UP/DOWN button to adjust the value for
Gobo 1 Wheel, Gobo 1 Rot or Gobo2 Wheel, press the ENTER button to store, the fixture will run as the channel
value indicates and to select No or Yes for Reset Gobo Oset or ReCal Gobo. Press the MENU button back to
the last menu or exit menu mode idling one minute.
Bekijk gratis de handleiding van VARI-LITE VL800 EventProfile, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VARI-LITE |
| Model | VL800 EventProfile |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4083 MB |
