VARI-LITE VL5LED handleiding
Handleiding
Je bekijkt pagina 43 van 48
USER MANUAL
WWW.VARI-LITE.COM
VL5LED WASH
43
SERVICE MENU ITEMS
To Set Position Cal (Tilt example)
Step 1. Step 1. Press [ESC] access the main menu.
Step 2. Press choose the “Fixture”, and press
Step 3. Press choose the “Service”, and press .
Step 4. Press choose the “Service Setting”, and press
Step 5. Press choose the “Set Position Cal”, and press
Step 6. Press choose the “Tilt”, and press .
Set Manual Mode Color Preset:
Step 1. Press access the main menu.
Step 2. Press choose the “Manual Mode Color Preset”, and press
Step 3. Press choose the “User Preset Setting”, and press . Step 4. Press choose “Intensity*”, “Red” , “Green” ,
“Blue” , “Amber” , “Lime” , “Cyan” , “Pan” , “Tilt” , “Zoom” , “Frost” , “Store (User Preset)” , “Clear”
Step 4. Press to accept and store the gobo o set setting or to cancel the gobo o set.
SELF-TESTS
RUNNING PARAMETER TESTS
The luminaire is capable of running self-tests by using the Test menu functions.
When running tests on multiple luminaires, a DMX termination connector is required at the last luminaire in the
link. Refer to “Connecting Data and Power” on page 14 for more information regarding the construction of this
connector.
NOTE: After 10 seconds of inactivity, the menu display will change to the default state showing the address.
WARNING: All maintenance procedures are to be performed with power removed from the luminaire. Never
remove covers or back cap while LAMP is in operation.
EQUIPMENT HANDLING
Below are some basic tips and information on handling luminaires and their associated components.
LOCATIONS/USE
Vari-Lite luminaires are designed for dry locations only. Exposure to rain or moisture (including, but not limited
to, fog machines, misters, etc.,) may damage luminaire.
SOLID STATE ELECTRONICS
Electrostatic Discharge (ESD)
Electrostatic discharge (ESD) presents a signifi cant danger to solid state electronic components (semiconductor
devices and PC board assemblies). Static electricity can build on a variety of common objects (including peo-
ple) simply by handling or moving. ESD rarely results in immediate failure of a component, but shows up later as
an intermittent problem or severely reduces the life of the component. All Vari-Lite equipment uses solid state
electronics and appropriate precautions to protect them should be observed when servicing.
Printed Circuit Boards (PCBs)
All PC boards should be shipped in electrostatic shielding bags. When handling PC boards or components,
devices such as conductive mats and conductive wrist straps should be used whenever possible. If these pre-
cautionary devices are not available, handling of PC boards and components should be avoided.
APPENDIX A
CARE AND MAINTENANCE
Bekijk gratis de handleiding van VARI-LITE VL5LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VARI-LITE |
| Model | VL5LED |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6380 MB |
