Handleiding
Je bekijkt pagina 20 van 56
2020
For the Installer
VQ0155
VQ0157
VQ0156
Press on MODE key to raise
the value.
Press on TURBO key to lower
the value.
Ajust the airflow until the
reading on magnehelic gauge
reaches the desired CFM value.
MODE
VQ0128A
TURBO
OR
Check the magnehelic
gauge along with the unit
balancing chart until the
desired airflow is reached.
M Set RECIRC speed.
VQ0158
VQ0160
VQ0159
Press % HUM key to
accept chosen percentage
and exit the menu OR
wait 60 seconds.
Connect the
magnehelic gauge to
FRESH airflow taps.
Press on MODE key to raise
the value.
Press on TURBO key to lower
the value.
Ajust the airflow until the
reading on magnehelic gauge
reaches the desired CFM value.
MODE
VQ0128A
TURBO
OR
VQ0121
% HUM
Check the magnehelic
gauge along with the unit
balancing chart until the
desired airflow is reached.
NOTE: According to the installation, the magnehelic gauge tubing can be
connected to exhaust OR supply air flow. The arrow on screen will
shown which airflow will have to be set.
L Set 20/40/60-minute control speed.
Plug magnehelic gauge
tubing to STALE airflow.
VQ0138
Plug magnehelic gauge
tubing to FRESH airflow.
The balancing procedure is completed.
The adjusted airflow values are stored in the unit. If needed, any X-Touch/Gold-Touch main control can be used to adjust the unit
speeds and balance the unit again. If a power failure occurs, the unit will keep these setting values in memory. To change the setting
values, go to step G and follow the procedure, the new values will replace the previous ones.
Press % HUM key
to accept chosen
percentage.
VQ0121
% HUM
Write selected
airflow percentage
on label affixed on
the unit for future
reference.
Write selected
airflow percentage
on label affixed on
the unit for future
reference.
Bekijk gratis de handleiding van VänEE G3000HE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VänEE |
| Model | G3000HE |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 9140 MB |
