Valley Craft F89503P handleiding
Handleiding
Je bekijkt pagina 11 van 21
PHT-800#
11
Maintenance and Adjustments
Maintenance and Adjustment Procedures
To keep your Powered Drum Truck operating properly, timely maintenance and adjustments
are required. These procedures should be performed only by qualied personnel who are
familiar with the equipment.
Maintenance and adjustment procedures are shown in Table 1.
Component Frequency Operation Procedure
Front Drive Wheels
(Hard Rubber Option)
Quarterly Visual Inspection Inspect drive wheels and
axles for signs of wear or
damage.
Replace hard rubber if
necessary.
Front Drive Wheels
(Pneumatic Option)
Quarterly Visual Inspection Inspect drive wheels and
axles for signs of wear or
damage.
Check pneumatic tire tread
and pressure.
Replace or ll tire as needed.
Rear Follower Wheels Quarterly Visual Inspection Inspect axle for signs of wear
or damage.
Quarterly Grease Pump grease into zerk in
both follower wheels.
Hand Brake System Quarterly Visual Inspection Inspect hand brake, clevis,
and cable for damage or
wear.
Ensure brake system is
properly adjusted.
Quarterly Visual Inspection Inspect band brakes,
eccentric bolts, and nuts for
signs of damage or wear, on
both drive wheels.
Ensure all nuts and bolts are
tight.
Table 1: Maintenance and Adjustment Procedures
Z41322A7
Inspect bolts securing the
drive wheels to the
transaxle making sure they
are snug. If loose tighten
bolts evenly.
Front Drive Wheel
Quarterly Visual Inspection
Bekijk gratis de handleiding van Valley Craft F89503P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valley Craft |
| Model | F89503P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3242 MB |
