Valley Craft F89484 handleiding

21 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 21
PHT-800#
13
Replacement
Replacement Procedures
Occassionally, it will be necessary to replace a part that has been damaged or worn. Many parts on
Valley Crafts Powered Hand Truck are replaceable. If replacement of a part is required, it should be
performed only by qualied personnel who are familiar with the equipment.
See Pages 14, 15, 16, 17, & 18 for available replacement parts. Identify the part number you need.
Contact Valley Craft Customer Service at 1-651-345-3386 or email:
customerservice@valleycraft.com.
Information required when contacting Valley Craft:
Company name and address
Contact persons name
Telephone number
E-Mail address
Model Number
Date of Manufacture
Part number(s) of part(s) to be ordered
The model number and date of manufacture is stamped on a metal tag located on the top back band
of the Powered Hand Truck.
The Powered Hand Truck is equipped with an LED Indicator light that will display fault codes
if a problem occurs. See Table 5 below for fault code information and possible causes.
Use this table as a guide when troubleshooting problems and contact Valley Craft for
additional information. Table 3: Indicator LED Fault Codes
LED Codes Sequence Explanation
LED o - No power or damaged controller.
LED Solid On - Unit Operational; No faults.
1,1 Thermal Cutback Excessive Load on Truck; Operating in Extreme
Environment.
1,2 Throttle Fault Throttle Input Wire open or shorted; Throttle damaged.
1,3 Speed Limit Pot Fault Speed Limit pot wires broken or shorted.
1,4 Under voltage Fault Battery Voltage <17V; Battery Connection Bad or
Damaged.
1,5 Over voltage Fault Battery Voltage >36V; Vehicle Operating with charger
attached.
4,1 Current Sense Fault Short in motor or in motor wiring.
Z41322A7

Bekijk gratis de handleiding van Valley Craft F89484, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkValley Craft
ModelF89484
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3242 MB