Valberg WF 712 C W180C handleiding
Handleiding
Je bekijkt pagina 28 van 116
25
EN
Problem Check whether / Possible cause
Final spin results are poor. The washing machine has an imbalance detection and
correction system. If individual heavy items are loaded
(e.g. bathrobes), this system may reduce the spin speed
automatically or even interrupt the spin completely if it
detects too great an imbalance even after several spin
starts, in order to protect the washing machine.
• If the laundry is still too wet at the end of the cycle,
remove some articles of laundry and repeat the spin
cycle.
• Excessive foam formation may prevent spinning. Use
the correct amount of detergent.
• Check that the spin speed selector has not been set
to “0”.
If your washing machine
has a time display: the
programme time initially
displayed is lengthened /
shortened by a period of
time:
This is a normal capacity of the washing machine to
adapt to factors that can have an effect on the wash
programme time, e.g.:
• excess foam formation;
• load imbalance due to heavy items of laundry;
• prolonged heating time due to reduced inlet water
temperature;
Because of influences like these, the time remaining
in the programme run is recalculated, and updated
if necessary. In addition, during the filling phase,
the washing machine determines the load and if
necessary adjusts the initial programme time displayed
accordingly. During such update periods, an animation
appears on the time display.
Enter the after-sales query mode
1. In the OFF mode, press the “
” + “ ” + “ ” to enter the after-sales inquiry mode.
2. It displays the number of operation cycles.
3. Press “ ” to switch cycles or fault codes
4. When querying fault codes, press the “ ” to page up and the “ ” to page down.
Fault Code List
Displayed on Display Window Fault Description
“F01” Water inflow fault
“F03” Drainage fault
“F13” Door lock fault
“F14” Door unlock fault
“F24" Overflow or too much foam.
Cleaning and maintenance
C
5. Turn the knob to «OFF», wait for 3 seconds, you will exit query mode.
Bekijk gratis de handleiding van Valberg WF 712 C W180C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WF 712 C W180C |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 10146 MB |
