Valberg WF 1810 D W566C2 handleiding
Handleiding
Je bekijkt pagina 70 van 158
70
EN
Problem Possible cause Solution
Snags, holes,
tears, rips or
excessive wear
• Overloaded • The dry weight of the load should be
less than 18 kg.
• Pens, pencils, nails,
screws or other
objects left in pockets
• Remove loose items from pockets.
• Pins, snaps, hooks,
sharp buttons, belt
buckles, zippers and
sharp objects left in
pockets
• Fasten snaps, hooks, buttons and
zippers.
Control time
wrong or changes
• This is normal • During spin the washer may need
to rebalance the load sometimes
to reduce vibrations. When this
happens, the estimated time is
increased causing time left to
increase or jump.
Not enough water • This is normal • Horizontal washers do not require
the tub to fill with water like top-
load washers.
Washer pauses
or has to be
restarted, or
washer door is
locked and will
not open
• Pump clogged • See page «Cleaning the Pump
Filter» on page 63 on how to
clean the Pump Filter.
Door unlocks or
press START/
PAUSE and
machine doesn’t
operate
• This is normal • Front-load washers start up
differently than top- load washers,
and it takes 30 seconds to check
the system. The door will lock and
unlock.
• Incorrect operation • Simply open and close the door
firmly; then press .
Cleaning and maintenance
C
Bekijk gratis de handleiding van Valberg WF 1810 D W566C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WF 1810 D W566C2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12763 MB |
