Valberg WF 1810 D W566C2 handleiding
Handleiding
Je bekijkt pagina 69 van 158
69
EN
Problem Possible cause Solution
Loud or unusual
noise; vibration or
shaking
• Cabinet moving • Washer is designed to move 1/4"
to reduce forces transmitted to the
floor. This movement is normal.
• All rubber leveling legs
are not firmly touching
the floor
• Push and pull on the back right and
then back left of your washer to
check if it is level. If the washer is
uneven, adjust the rubber leveling
legs so they are all firmly touching
the floor and locked in place.
Your installer should correct this
problem.
• Unbalanced load • Open door and manually
redistribute load. To check
machine, run rinse and spin with
no load. If normal, unbalance was
caused by load.
• Pump clogged • See page «Cleaning the Pump
Filter» on page 63 on how to
clean the Pump Filter.
No power/
washer not
working or dead
• Washer is unplugged • Make sure cord is plugged securely
into a working outlet.
• Washer is unplugged • Turn cold faucet fully on.
• Circuit breaker/fuse is
tripped/blown
• Check house circuit breaker/fuses.
Replace fuses or reset breaker.
Washer should have separate
outlet.
• Automatic self system
checks
• First time the washer is plugged
in, automatic checks occur. It may
take up to 20 seconds before you
can use your washer. This is normal
operation.
Cleaning and maintenance
C
Bekijk gratis de handleiding van Valberg WF 1810 D W566C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WF 1810 D W566C2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12763 MB |
