Valberg WF 1810 D W566C2 handleiding
Handleiding
Je bekijkt pagina 68 van 158
68
EN
Problem Possible cause Solution
Clothes too wet • Load is out of balance • Redistributes clothes and run drain
& spin or rinse & spin.
• Increase load size if washing small
load containing heavy and light
items.
• The machine will slow the spin
speed down to 400 rpm if it has a
hard time balancing the load. This
speed is normal.
• Pump clogged • See page «Cleaning the Pump
Filter» on page 63 on how to
clean the Pump Filter.
• Overloading • The dry weight of the load should be
less than 18 kg.
• Drain hose is kinked or
improperly connected
• Straighten drain hose and make
sure washer is not sitting on it.
• Household drain may
be clogged
• Check household plumbing. You
may need to call a plumber.
• Drain hose siphoning;
drain hose pushed too
far down the drain
• Ensure there is an air gap between
hose and drain.
Incomplete cycle
or timer not
advancing
• Automatic load
redistribution
• Timer adds 3 minutes to cycle for
each rebalance. 11 or 15 rebalances
may be done. This is normal
operation. Do nothing; the machine
will finish the wash cycle.
• Pump clogged • See page «Cleaning the Pump
Filter» on page 63 on how to
clean the Pump Filter.
• Drain hose is kinked or
improperly connected
• Straight drain hose and make sure
washer is not sitting on it.
• Household drain may
be clogged
• Check household plumbing. You
may need to call a plumber.
• Drain hose siphoning;
drain hose pushed too
far down the drain
• Ensure there is an air gap between
hose and drain.
Cleaning and maintenance
C
Bekijk gratis de handleiding van Valberg WF 1810 D W566C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WF 1810 D W566C2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12763 MB |
