Valberg WF 1810 D W566C2 handleiding
Handleiding
Je bekijkt pagina 61 van 158
61
EN
Cleaning and maintenance
C
Washer care
Cleaning
Exterior
Immediately wipe off any spills. Wipe with damp cloth. Do not hit
surface with sharp objects.
Interior
To clean the interior of the washer, select the Tub Clean feature
on the control panel. This Tub Clean cycle should be performed,
at a minimum, once per month. This cycle will use more water, in
addition to bleach, to control the rate at which soils and detergents
may accumulate in your washer.
Note: Read the instructions below completely before
starting the Tub Clean cycle.
1.
Remove any garments or objects from the washer and ensure
the washer basket is empty.
2.
Open the washer door and pour one cup or 250ml of liquid
bleach or other washing machine cleaner into the basket.
3.
Close the door and select the Tub Clean cycle. Push the START/
PAUSE button.
4.
When the Tub Clean cycle is working, the display will show
the estimated cycle time remaining. The cycle will complete
in about 90 minutes. Do not interrupt the cycle.
5.
After the cycle is complete, leave the door open slightly for
better ventilation.
Bekijk gratis de handleiding van Valberg WF 1810 D W566C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WF 1810 D W566C2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12763 MB |
