Valberg WF 1810 D W566C2 handleiding
Handleiding
Je bekijkt pagina 55 van 158
55
EN
Product usage
B
MY CYCLE
To save a favorite cycle, set
the desired setting for wash
cycle, soil level, spin speed
and wash temp settings
and hold down the My Cycle
button for 3 seconds, A beep
will sound to indicate the
cycle has been saved.
To use your custom cycle,
press the My Cycle button
before washing a load.
To change the saved cycle, set
the desired setting and hold
down the My Cycle button for
3 seconds.
NOTE: When using My Cycle,
wash options cannot be
modified after the cycle has
been started.
NOTE: If you change wash
Cycles before starting the
cycle, the My Cycle light
will turn off and you will be
returned to the base cycle.
DELAY
You can delay the start of
a wash cycle for up to 24
hours. Press the Delay Wash
button to choose the amount
of time you want to delay the
start of the wash cycle. Once
the desired time is reached,
press the button. The
machine will count down and
start automatically at the
correct time.
NOTE: If you forget to fully
close the door, a remainder
signal will beep reminding
you to do so.
NOTE: If you open the door
when the delay is counting
down, the machine will enter
the pause state. You must
close the door and press
button again in order to
restart the countdown.
Bekijk gratis de handleiding van Valberg WF 1810 D W566C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WF 1810 D W566C2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12763 MB |
