Valberg WF 1810 D W566C2 handleiding
Handleiding
Je bekijkt pagina 48 van 158
48
EN
Product usage
B
IMPORTANT: Failure to remove the shipping bolts* can cause the washer to become
severely unbalanced.
Save all bolts for future use.
*Any damages from failure to remove the shipping bolts are not covered by the warranty.
Note: If you must transport the washer at a later date, you must reinstall the
shipping support hardware to prevent shipping damage. Keep the hardware in
the plastic bag provided.
Installing the Washer (For Cold Water Faucets)
1. Run some water from the cold faucet to flush the water lines and remove particles that
might clog up the inlet hose.
2. Ensure there is a rubber washer in the hoses. Reinstall the rubber washer into the hose
fitting if it has fallen out during shipment. Carefully connect inlet hose to the inside ‘’C’’
outlet of the water valve. Tighten by hand; then tighten another 2/3 turn with pliers.
Do not crossthread or over-tighten these connections.
3.
Install the screen washers by inserting them into the free ends of the inlet hoses with
protruded side facing the faucet.
Bekijk gratis de handleiding van Valberg WF 1810 D W566C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WF 1810 D W566C2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12763 MB |
