Valberg WD 8614 A 10/D W566C handleiding
Handleiding
Je bekijkt pagina 32 van 126
30
EN
Caution!
•
Make sure that valve cap and emergency drain hose
are reinstalled properly, cap plates should be inserted
aligning to hole plates otherwise water may leak.
•
When the appliance is in use and depending on the
programme selected there can be hot water in the
pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the
cycle, and is empty. When replacing the cover, ensure
it is securely re-tightened.
Trouble Shooting
Whenever there is a problem with the appliance, check if you can solve it following the tables
below.
Description Possible cause Solution
Appliance does not
start
• Door is not closed
properly.
• Clothes are stuck.
• Close the door properly and restart.
• Check the laundry.
Door can´t be
opened
• Safety protection is
activated.
• Disconnect the power and restart.
Water leakage • Connections are not
tight enough.
• Check and fasten the water inlet
pipe.
• Check and clean the outlet hose.
Detergent residues
in the detergent
dispenser
• Detergent is damp
and/or clotted.
• Clean and wipe the detergent
dispenser dry.
Indicator or display
does not work
• PC board or
harness have
connection
problems.
• Switch off the power and check if the
mains plug is connected properly.
Abnormal noise • Fixing bolts still in
place.
• Floor is not solid or
level.
• Check if the fixing bolts have been
removed.
• Make sure the appliance is installed
on a solid and level floor.
Cleaning and maintenance
C
Bekijk gratis de handleiding van Valberg WD 8614 A 10/D W566C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WD 8614 A 10/D W566C |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 10210 MB |
