Valberg WD 10714 A 10/D W180C handleiding
Handleiding
Je bekijkt pagina 13 van 144
11
EN
2.
Connect the drain hose to the Drain or hook it over the edge of a sink by means of the
“U” bend.
Fit the “U” bend E, if not already installed, at the end of the drain hose.
Notes:
• Ensure that there are no kinks in the drain hose.
• Secure the hose so that it cannot fall down. After wash phase, machine will
drain out hot water.
• Small hand basins are not suitable.
•
To make an extension use a hose of the same type and secure the connections
with clips.
• Max. Overall drain hose length: 2.50 m.
Before the first wash cycle
To remove any residual water used during testing by the manufacturer, we recommend that
you carry out a short wash cycle without laundry.
1. Open the tap.
2. Close the door.
3.
Pour a little detergent (about 30 ml) into the main wash chamber of the detergent
dispenser.
4. Select and start a short programme.
Product usage
B
Bekijk gratis de handleiding van Valberg WD 10714 A 10/D W180C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | WD 10714 A 10/D W180C |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 12058 MB |
