Valberg WD 10714 A 10/D W180C Handleiding (144 Pagina's)

Handleiding

9

EN

Install bottom cover

To realize quieter operation, a bottom cover is supplied with the unit (only applies to some of

the Hisense washers). After installing the cover at the bottom of the washer, the noise level

will be greatly reduced. Please ask for advice from specialists before installing the cover,

nevertheless, the machine can be used without the bottom cover.

Noise-reduction bottom plate installation instructions

1.

Before installing the noise-reduction bottom plate, align and paste the acoustic absorption

wool with and along the right-angle impression on bottom plate (this procedure is

unnecessary for some of the models without acoustic absorption wool).

Right-angle impression

2. Remove surface paper on double sided tape at four sides of the bottom plate.

Double sided tape

3.

Incline the machine to an angle of 40° and let the side with right-angle notch face towards

front of the washing machine, as shown in the ﬁgure. Insert the side with oblique-angle

notch between two foot screws at back of the washing machine completely in place.

Then, install the bottom plate and ensure that it contacts with bottom of the washing

machine closely.

Product usage

B

Bekijk gratis de handleiding van Valberg WD 10714 A 10/D W180C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.