Valberg VAL-H&F20 handleiding

44 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 20 van 44
18
EN
Product usage
B
Before using the product
WARNING!
Correctly connect the unit and do not leave it within the reach of unsupervised
children.
It is normal for heaters to emit an odour and smoke when they are turned on
for the first time or have not been used for a certain period of time. This will
disappear after a short while.
The heater must always be placed in an upright position on a horizontal surface.
Place the heater on a stable, heat-resistant and non-combustible horizontal surface
that is at least 30 cm (sides and rear) and 50 cm (front) clear of objects such as walls,
furniture and curtains.
Never place the heater below electrical sockets.
The heater is suitable for use in a 10-15 m² space, such as a living room or office.
Do not use the heater in a bathroom or near to a swimming pool or other body of water.
The heater must never become wet. Do not use the heater in wet or humid conditions.
Direct the air outlet into the room so that the air can flow freely. Make sure the air inlets
are unobstructed. Do not cover the heater’s air inlet or outlet vents/grilles.
Operation
1. Fully unwind the power cable.
2.
Check the heater’s rating plate for the correct voltage. Connect the plug to a mains socket
with a suitable voltage. A beep will sound and the power icon will light up.
3. Press the button to turn the unit on.
4.
Press the button repeatedly to select one of the four modes and the corresponding
icon will light up:
Icon Mode
Low fan
High fan
Low heater (1200 W)
High heater (2000 W)
NOTE: When the unit turns on, the default setting is high heater.

Bekijk gratis de handleiding van Valberg VAL-H&F20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkValberg
ModelVAL-H&F20
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2541 MB