Valberg ST3 handleiding
Handleiding
Je bekijkt pagina 10 van 50
9
EN
Cleaning and maintenance
C
Cleaning and maintenance
WARNING!
•
To prevent the risk of electrocution, turn off and unplug
the steam mop from the mains supply before cleaning.
•
Never immerse the steam mop, or its power cable and
plug in water or in any other liquid. Never rinse them
under the tap.
NOTE: Never use solvents, chemical or abrasive cleaning
products, wire brushes, sharp objects or scouring pads
to clean the steam mop.
1. After using the product, allow it to cool down and then empty
the water container (13). Close the cover of the water inlet (12)
only after the water container (13) has dried up completely.
2.
Put the product vertically on the floor. Step on the tab of the
glider (D) to remove it (if needed) and remove the cleaning
cloth (C). Use mild cleaning detergent to thoroughly clean the
cleaning cloth (C), before thoroughly rinsing and air-drying it.
3. Use a soft damp cloth to clean the main body (9), mop head’s
(11) top surface and the telescopic tube (3). Thoroughly wipe
with dry cloth before further use.
4.
Retract the telescopic tube (3) completely and lock tight. Wind
the power cable around the hooks (2 and 5). Put the steam
mop and the accessories in a dry and cool place, out of reach
of children or animals.
Bekijk gratis de handleiding van Valberg ST3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | ST3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3646 MB |
