Handleiding
Je bekijkt pagina 23 van 72
16 EN
Using the appliance
B
Booster function
• To use this function, select a cooking zone and set the required heat level, then press the
"P" (Booster) button.
• The Booster function can only be activated if the selected cooking zone can use it. If the
Booster function is active, a "P" appears in the corresponding display.
• Activating the Booster function may exceed the maximum power, in which case the integrated
heat management system automatically turns on.
• In order to indicate the required reduction in power, the corresponding cooking zone display
will ash.
• The ashing lasts for 3 seconds so that the settings can be changed before the power is
reduced.
Error codes
In the event of an error, an error code appears on the cooking level displays.
E0
The amperage limitation function must be selected when the product is powered on.
Otherwise, the error E0 appears. At the same time, this function must be selected on
the screen and the motherboard. If there is an error in a card's software, the product
will display an error. This error cannot be resolved by the customer. It is necessary
to call an authorised service.
E1 The cooling fan is deactivated. Contact a qualied technician.
E2
This error appears when the radiator gets too hot. In this case, the radiator must be
left to cool down. It can only start working again when it has cooled down.
E3
The supply voltage does not match the nominal value. Press
to
stop the hob, wait until "H" disappears for all the zones, press
to turn on the hob
and continue using it. If the same error is displayed again, contact a qualied technician.
E4
The supply frequency does not match the nominal value. Press
to stop the hob, wait
until "H" disappears for all the zones, press
to turn on the hob and continue using
it. If the same error appears again, switch off the appliance at the plug and switch it
back on again. Press
to turn on the hob and continue using it. If the same error is
displayed again, contact a qualied technician.
E5
The internal temperature of the hob is too high. Press
to switch off the hob and
let the heating elements cool down.
E6
Communication error between the touch-sensitive controls and the heating element.
Contact a qualied technician.
Bekijk gratis de handleiding van Valberg IC 5060 3MC K 701T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | IC 5060 3MC K 701T |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4710 MB |
