Handleiding
Je bekijkt pagina 23 van 100
21
EN
Cleaning and maintenance
C
Problem Solution
Display is not on
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the “On/Off” button.
“
” is lighting
•
Check the water container. If it’s full, please pour out
the condensate water and restart the dryer.
•
If the container is not full, please restart the dryer
directly.
•
If the “ ” icon is still lighting after you have finished
the first two steps, please call the service.
“
” is lighting
• Clean the lint filter.
Dryer does not start
• Connect the tumble dryer to the mains.
• Turn on the tumble dryer.
• Check the the door is closed.
• Check the programme is set.
• Press the “Start/Pause” button.
Degree of dryness was not
reached or drying time too
long
• Clean lint filter and heat exchanger.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
•
Use higher drying intensity level programme or time
programme.
There are humming noises
•
The compressor is operating. These noises are quite
normal and do not indicate a fault.
The dryer switches off at the
end of the programme
• The dryer switches off automatically for energy saving.
This is not an error but a normal function.
Warning!
If you cannot deal with the problems by yourself and need
help:
• Press the “On/Off” button.
• Pull out the mains plug and call the service.
Bekijk gratis de handleiding van Valberg DHP 8 A++ S566C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | DHP 8 A++ S566C |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 7526 MB |
