Handleiding
Je bekijkt pagina 18 van 76
16
EN
Problem Solution
Door seal fails to be tight • Remove foreign matters on the door seal
•
Heat the door seal and then cool it for restoration
(or blow it with an electrical drier or use a hot towel
for heating)
Water pan overflows •
There is too much food in the chamber or food stored
contains too much water,resulting in heavy defrosting
•
The doors are not closed properly, resulting in
frosting due to entry of air and increased water due
to defrosting
Hot housing •
Heat dissipation of the built-in condenser via the
housing, which is normal. When housing becomes
hot due to high ambient temperature, storage of
too much food or shutdown of the compressor is
shut down, provide sound ventilation to facilitate
heat dissipation.
Surface condensation •
Condensation on the exterior surface and door seals
of the refrigerator is normal when the ambient
humidity is too high. Just wipe the condensate
Abnormal noise • Buzz: The compressor may produce buzzes during
operation, and the buzzes are loud particularly upon
start or stop. This is normal.
•
Creak: Refrigerant flowing inside of the appliance
may produce creak, which is normal.
Changing the Light
•
This product contains a light source exempted of energy
efficiency class. Light source in this product can only be replaced
by qualified professionals. Please contact after-sales service
if the light source fails.
•
The light source shall be removed at the end of the product’s
useful life, with sorting and recycling done separately.
Cleaning and maintenance
C
Bekijk gratis de handleiding van Valberg CS 262 D S625C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | CS 262 D S625C |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4757 MB |
