Valberg CS 262 D S625C handleiding

76 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 76
12 EN
Product usage
B
Functions
Thermostat setting for ambient T°C : NORMAL ≈ +24°C (± 4°C)
MED
Thermostat setting for ambient T°C : COLD ≈ +16°C (± 4°C) MED
Thermostat setting for ambient T°C : HOT ≈ +32°C (± 4°C) MED
Control panel
Display
Once initially powered on,all LED lights turn on for 3 seconds, and then the refrigerator
runs at the default setting (MED light is on).
In case of a failure, the corresponding LED blinks.
In case of no failures, it shows the actual temperature setting of refrigerator.
Fault Code Fault Description
MAX flashing Temperature sensor failure of refrigerating chamber
MED flashing Failure of defrosting sensor in refrigerating chamber
MIN flashing Ambient temperature sensor error
Temperature setting
Each time the temperature setting button SETTING is pressed once, the temperature setting
changes one time. After the temperature setting has been completed, the refrigerator
will run according to the set value after 30s.
Super freeze mode
Long press temperature setting button for 6s, it will enter Super freeze mode after 30s,
and MED and MIN LED turn on at the same time.
After running for 40 hours at Super freeze mode or the setting button is pressed, it will
quit the Super freeze mode, then go back to the previous setting.
Super cool mode
Long press temperature setting button for 3s, it will enter Super cool mode after 30s,
and MAX and MED LED turn on at the same time.
After running for 6 hours at Super cool mode or the setting button is pressed, it will quit
the Super cool mode, then go back to the previous setting.

Bekijk gratis de handleiding van Valberg CS 262 D S625C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkValberg
ModelCS 262 D S625C
CategorieKoelkast
TaalNederlands
Grootte4757 MB