Valberg 14S40 B XAD929C V2 handleiding
Handleiding
Je bekijkt pagina 8 van 168
6
EN
• Please follow the steps below for adding dishwasher salt:
SALT
1. Remove the lower basket and unscrew the reservoir cap.
2.
Place the end of the funnel (if supplied) into the hole and pour in about 1.5 kg of dishwasher
salt.
3. Fill the salt container to its maximum limit with water, It is normal for a small amount of
water to come out of the salt container.
4. After filling the container, screw back the cap tightly.
5. The salt warning light will turn off after the salt container has been filled with salt.
6.
Immediately after filling the salt into the salt container, a washing program should be
started (We suggest to use a short program). Otherwise the filter system, pump or other
important parts of the machine may be damaged by salty water. This is out of warranty.
NOTE:
•
The salt container must only be refilled when the salt warning light in the
control panel comes on. Depending on how well the salt dissolves, the salt
warning light may still be on even though the salt container is filled. If there is
no salt warning light in the control panel (for some models), you can estimate
when to fill the salt into the softener by the cycles that the dishwasher has run.
• If salt has spilled, run a soak or quick program to remove it.
Basket Loading Tips
Adjusting the upper basket
1.
To raise the upper basket, just lift the upper basket at the center of each side until the
basket locks into place in the upper position. It is not necessary to lift the adjuster handle.
Product usage
B
Bekijk gratis de handleiding van Valberg 14S40 B XAD929C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | 14S40 B XAD929C V2 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 15217 MB |
