Valberg 14S40 B XAD929C V2 handleiding
Handleiding
Je bekijkt pagina 31 van 168

29
EN
Program Description of cycle
Detergent
pre/main
wash
Running
time
(min)
Energy
(kWh)
Water
(L)
Rinse
aid
Self-
cleaning
Pre-wash
Wash (60 °C)
Rinse
Rinse (70-72 °C)
Drying
4/18g
(1 or 2 tabs)
130 1.235-1.265 15.1
NOTE:
The ECO program is suitable to clean normally soiled tableware, that for this
use, it is the most efficient program in terms of its combined energy and water
consumption, and it is used to assess compliance with the EU ecodesign legislation.
Saving energy
1. Pre-rinsing of tableware items leads to increased water and energy consumption and is
not recommended.
2.
Washing tableware in a household dishwasher usually consumes less energy and water in
the use phase than hand dishwashing when the household dishwasher is used according
to the instructions.
Starting a program
1.
Draw out the lower and upper basket, load the dishes and push them back. It is commended
to load the lower basket first, then the upper one.
2. Pour in the detergent.
3.
Insert the plug into the socket. The power supply refer to last page ”Product fiche”. Make
sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause button,
the dishwasher will start its cycle.
Changing the program mid-cycle
•
A program can only be changed if it has been running only for a short period of time,
otherwise the detergent may have already been released or the the wash water with
detergent has already been drained. If this is the case, the dishwasher needs to be reset
and the detergent dispenser must be refilled.
To reset the dishwasher, follow the instructions below:
1.
Press the Start/Pause to stop the machine, then press any program button for more than
3 seconds, the selected program will be cancel.
2. After the selected program be canceled, you can press the desired program.
3. Press the Start/Pause button, the dishwasher will start.
Product usage
B
Bekijk gratis de handleiding van Valberg 14S40 B XAD929C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Valberg |
Model | 14S40 B XAD929C V2 |
Categorie | Vaatwasser |
Taal | Nederlands |
Grootte | 15217 MB |