Valberg 14S40 B WAD929C handleiding
Handleiding
Je bekijkt pagina 9 van 112
7
EN
Back of dishwasher
Mains Cable
Drain Pipe
Water Inlet
Counter
Drain hose
Drain Pipe
How to drain excess water from hoses
If the connection to the drain pipe is positioned higher than 1000mm, excess water may
remain in the drain hose. It will be necessary to drain excess water from the hose into a bowl
or suitable container that is held outside and lower than the sink.
Water outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must not be longer than 4 meters, otherwise the cleaning effect of the dishwasher could
be reduced.
Syphon connection
The waste connection must be at a height less than 1000mm (maximum) from the bottom
of the dishwasher.
Positioning the appliance
Position the appliance in the desired location. The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or walls. The dishwasher is equipped with water
supply and drain hoses that can be positioned either to the right or the left sides to facilitate
proper installation.
Levelling the appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be altered
via adjustment of the screwing level of the feet.
In any case, the appliance should not be inclined more than 2°.
Product usage
B
Bekijk gratis de handleiding van Valberg 14S40 B WAD929C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | 14S40 B WAD929C |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 10141 MB |
