Valberg 14S40 B WAD929C handleiding
Handleiding
Je bekijkt pagina 13 van 112
11
EN
Please follow the steps below for adding dishwasher salt:
SALT
1. Remove the lower basket and unscrew the reservoir cap.
2.
Place the end of the funnel (if supplied) into the hole and pour in about 1.5kg of dishwasher
salt.
3. Fill the salt container to its maximum limit with water, It is normal for a small amount of
water to come out of the salt container.
4. After filling the container, screw back the cap tightly.
5. The salt warning light will turn off after the salt container has been filled with salt.
6.
Immediately after filling the salt into the salt container, a washing program should be
started (We suggest to use a short program). Otherwise the filter system, pump or other
important parts of the machine may be damaged by salty water. This is out of warranty.
NOTE:
• The salt container must only be refilled when the salt warning light ( ) in
the control panel comes on. Depending on how well the salt dissolves, the
salt warning light may still be on even though the salt container is filled.
If there is no salt warning light in the control panel (for some models), you
can estimate when to fill the salt into the softener by the cycles that the
dishwasher has run.
• If salt has spilled, run a soak or quick program to remove it.
Basket loading tips
Type 1:
The height of the upper basket can be easily adjusted to accommodate taller dishes in either
the upper or lower basket.
To adjust the height of the upper rack, follow these steps:
1. Pull out the upper basket.
lower position
Product usage
B
Bekijk gratis de handleiding van Valberg 14S40 B WAD929C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | 14S40 B WAD929C |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 10141 MB |
