Vaddio ZoomSHOT 20 SE AVBMP handleiding
Handleiding
Je bekijkt pagina 13 van 53
Camera switch settings
The camera's DIP switches set basic camera behaviors and the rotary switch sets the video output
resolution and frame rate.
Behaviors – DIP switches:
Switch ON (up)
1 Switches 1 and 2 set how the camera responds to the
remote.
1 and 2 up: Camera 1
1 down, 2 up: Camera 2
1 up, 2 down: Camera 3
2
3 On (up):IR sensor on
Off (down): IR sensor off (ignore the remote)
4 On (up):Normal image orientation
Off (down):Image flip (for inverted mounting)
5 Not used
6 On (up): Normal operation
Off (down): Firmware update
All off: Restore factory defaults on next power cycle
Resolution and frame rate – rotary switch:
Position Video output Position Video output
0 720p/59.94 (USB) 8 1080p/50
1 1080i/59.94 9 (not used)
2 1080p/59.94 A (not used)
3 720p/60 B (not used)
4 1080i/60 C (not used)
5 1080p/60 D (not used)
6 720p/50 E 1080p/30
7 1080i/50 F 1080p/25
Note
The camera ships with the rotary switch set to the appropriate resolution for use with the Quick-Connect
USB Mini, which cannot ingest video at resolutions higher than 720p.
If you are installing a ZoomSHOT 20 SE QMini system, leave the rotary switch in its factory
default position. If you change to a higher resolution, the Quick-Connect USB Mini will not be able to
send video.
About ceiling-mounted cameras
If you use an inverted mount, set the camera's DIP switch 4 down for inverted operation. This orients the
video image correctly.
10
Complete Manual for the ZoomSHOT 20 SE Fixed Camera
Bekijk gratis de handleiding van Vaddio ZoomSHOT 20 SE AVBMP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vaddio |
| Model | ZoomSHOT 20 SE AVBMP |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8455 MB |
