Vaddio EasyIP AMP D handleiding
Handleiding
Je bekijkt pagina 12 van 13
Troubleshooting
What is it doing? Possible causes Check and correct
The connected speaker is
unresponsive.
The cable from the amp to the
speaker is not fully seated at
one end, or is bad.
Check the cable for correct pin-out and
continuity.
The amp is not paired to the
host device.
Use the Dante Controller application to
pair the amp with the host device.
The Dante Controller
application cannot locate the
amp
The cable from the EasyIP
AMP D to the EasyIP Switch
is not fully seated at one end,
or is bad.
Check the cable for correct pin-out and
continuity.
The Vaddio Deployment Tool
cannot locate the amp.
EasyIP audio devices are not
available through the Vaddio
Deployment Tool.
Use the Dante Controller application to
locate the amp.
Operation, Storage, and Care
For smears or smudges on the product, wipe with a clean, soft cloth. Use a lens cleaner on the lens. Do
not use any abrasive chemicals.
Keep this device away from food and liquids.
Do not operate or store the device under any of the following conditions:
n
Temperatures above 104° F (40° C) or below 32° F (0° C)
n
High humidity, condensing or wet environments
n
Inclement weather
n
Severe vibration
n
In a hydraulic press
n
Dry environments with an excess of static discharge
Do not attempt to take this product apart. There are no user-serviceable components inside.
Complete Manual for the EasyIP AMP D Network-Connected Amplifier
10
Bekijk gratis de handleiding van Vaddio EasyIP AMP D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vaddio |
| Model | EasyIP AMP D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1780 MB |