Vaddio EasyIP 5 ePTZ handleiding
Handleiding
Je bekijkt pagina 19 van 72
15
Configuring and adjusting the camera
Image-related settings and adjustments are on the Camera page of the camera's administrative web
interface. Autoframing settings and adjustments are on the Autoframing page. Video and control settings
are available from the System page.
Note
Many pages of the web interface are nearly the same across large groups of Vaddio products. Some of
the screen shots in this section may be from other Vaddio cameras.
About pairing cameras and configuring streaming
The camera becomes part of an EasyIP system when it is paired to a host device – EasyIP Decoder or
EasyIP Mixer. The host device originates the stream, using the video from the camera and audio from
connected microphones.
Refer to the manual for your host device for information on camera pairing and streaming settings.
Setting the camera's IR channel
The camera's remote can control up to three cameras, using different IRchannels. By default, Vaddio
cameras with IR control use channel 1. If you already have a camera set up to use channel 1, you can
change the IR channel for other cameras, and then select the appropriate channel using the buttons on
the remote.
To set the camera's IR channel:
On the System page's General tab, select the desired channel in the IR Remote section.
Complete Manual for the EasyIP 5 ePTZ AV-over-IP Camera
Bekijk gratis de handleiding van Vaddio EasyIP 5 ePTZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vaddio |
| Model | EasyIP 5 ePTZ |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8274 MB |
