Vacmaster UB0402 handleiding
Handleiding
Je bekijkt pagina 16 van 84
-16-
Replacing Belt
Replace the belt whenever a burning rubber smell caused by excessive slippage
occurs.
1. Lay the vacuum cleaner on oor with the bottom up and the oor nozzle at.
2. Use a Phillips head screwdriver to remove the six screws from the lower plate.
NOTE: The six screws are divided into three categories and listed as below.
Ensure different screws are preserved properly. It is recommended to use a
Phillips head screwdriver rather than an electric screwdriver.
5. Push the bracket into the dust bag collar until the tabs snap securely into
place. Press rmly on the center of the bracket until you hear a click. This
indicates that the bracket is securely locked in place.
6. Tuck the dust bag into the outer bag. Be sure all sides of the dust bag are at
within the outer bag. Close the outer bag with the zipper.
WARNING
Always unplug the power cord from electrical outlet before performing any
service on vacuum cleaner.
Bekijk gratis de handleiding van Vacmaster UB0402, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vacmaster |
| Model | UB0402 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6885 MB |
