Handleiding
Je bekijkt pagina 25 van 32

11 Trouble-shooting
Malfunction Possible cause Solution/Measures
Illumination is not
working.
▪ Sabbath mode is active.
▸ Hold the button depressed
for 3 seconds.
▪ If the illumination turns on: The
problem is remedied.
▪ If the appliance switches off
(«OF» in the display):
▸ Switch the appliance back on
again and contact Customer
Services.
▸ Check whether an air flow
is perceptible at the air
outlets in the room con-
cerned.
▪ If yes: Door sensor is faulty
(message A1 or A2).
▪ If no: LED light strip is de-
fective.
▸ Contact Customer Services.
Illumination is flash-
ing.
▪ Appliance door is left open
for longer than 3 minutes.
▪ Appliance door was not
closed properly.
▸ Close the appliance door.
Illumination is flash-
ing and an acoustic
signal is emitted.
▪ Appliance door is left open
for longer than 5 minutes.
▪ Appliance door was not
closed properly.
▪ Door sensor is faulty.
▸ Close the appliance door.
– If the alarm is still being emit-
ted:
▸ Touch any button to acknow-
ledge the alarm.
▸ Check the door seal, contents
and installation situation for any
obstructions.
– After acknowledging 3×, an
error message appears: A1
or A2.
▸ Contact Customer Services.
Malfunction Possible cause Solution/Measures
Refrigerator compart-
ment illumination is
on when the door is
closed
▪ Installation temperature of
below about 13°C.
▸ No action necessary.
– Normal appliance behaviour.
The appliance protects the
food from temperatures that
are too cold through additional
heat input.
25
Bekijk gratis de handleiding van V-Zug CombiCooler V2000 152NI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | V-Zug |
| Model | CombiCooler V2000 152NI |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2102 MB |



