V-Zug AdoraDish V2000 IC handleiding
Handleiding
Je bekijkt pagina 20 van 36
7 V-ZUG-Home configuration
Combair V200
Valid for models up to 31.03.2022:
Enabling V-ZUG-Home mode «Operate and display»
▸ Turn the dial to the position.
▸ Turn the dial clockwise as far as it will go and hold in this end-stop position for at
least 3seconds.
– flashes.
– The connecting mode is active for 60seconds.
▸ Connect the household appliance to the home network within this time (see page
11).
– illuminates.
– The V-ZUG-Home mode «Operate and display» is enabled.
Enabling V-ZUG-Home mode «Off»
▸ Turn the dial to the position.
▸ Turn the dial clockwise as far as it will go and hold in this end-stop position for at
least 3seconds.
– is no longer illuminated.
– The V-ZUG-Home mode «Off» is enabled.
Resetting the V-ZUG-Home settings to the factory settings
▸ Turn the dial to the position.
▸ Turn the dial clockwise as far as it will go (until the end-stop).
▸ Turn the dial anti-clockwise to below «250°C».
▸ Turn the dial clockwise as far as it will go (until the end-stop).
▸ Turn the dial anti-clockwise to below «250°C».
▸ Turn the dial clockwise as far as it will go (until the end-stop).
– illuminates.
– The V-ZUG-Home settings have been reset to the factory settings (see page 27).
The temperature selector must be turned to below 250°C twice within 6seconds.
20
Bekijk gratis de handleiding van V-Zug AdoraDish V2000 IC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | V-Zug |
| Model | AdoraDish V2000 IC |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 2607 MB |