V-Tac VT-12341 handleiding
Handleiding
Je bekijkt pagina 38 van 83
37
components will bear great stress, which may cause damage to the components and adversely affect
the performance. If the energy storage system is damaged due to improper operation, it is not covered
by the warranty.
3.4.1 Forklift Transportation
This device can be carried by forklift. When you move the energy storage system by forklift, the
forklift arm must be inserted from the front of the device and completely pass through the bottom of the
device, as shown in Figure3-6.
Figure3-6 Forklift transportation diagram (unit: mm)
* Forklift should have a safety factor of at least 2 times weight of the energy storage system.
* When lifting the energy storage system, keep the centre of gravity of the energy storage system
at the center of the two forks and keep the handling process slow and smooth.
* Pay attention to the width and inserted depth between the fork arms to prevent instability or
tipping.
* Pay attention to the distance between the forklift and the device to avoid damage to the
appearance, door locks and louvers.
* During moving, the tilt angle of the energy storage system should not exceed 10°, do not put it
down or lift it up suddenly, and pay attention to the turning, up ramps and down ramps to avoid
collision of the device.
3.5 Installation Preparation
Bekijk gratis de handleiding van V-Tac VT-12341, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | V-Tac |
| Model | VT-12341 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27251 MB |
