V-Tac VT-12341 handleiding
Handleiding
Je bekijkt pagina 11 van 83
10
* Avoid unnecessary touch for PCB.
* Wear an anti-static wrist strap before touching sensitive components, and the other end should
be well grounded.
1.2.1.8 APP Parameter Setting
Parameter setting is closely related to the operation of energy storage system, so the setting should
be performed after estimating.
* Improper parameter setting may affect the function of energy storage system.
* Only qualified professional can perform the parameter setting.
1.2.1.9 Moisture-proof and Sand-proof Protection
Moisture or sand incursion may cause the energy storage system damage!
Observe the following items to ensure the energy storage system works normally.
* When the air humidity is more than 95% or under the circumstance of sandstorm, strong wind,
hailstone, etc., don't open the door of the energy storage system.
* In the wet or damp weather, don't open the door of energy storage system to maintain or repair.
1.2.1.10 Safety Warning Mark Setting
In order to avoid accident for unwanted person getting close to inverter system or makes improper
operation, it should observe the following requirements when perform installation, daily maintenance
or repair.
* Set warning marks at the battery connection and grid connection of energy storage system to
avoid switching on the breakers improperly.
* Set warning signs or safety warning belt in the operation area, which is to avoid unwanted
person entering and cause human injury or device damage.
* After maintenance, ensure that pull out the key of energy storage system and save it properly.
Bekijk gratis de handleiding van V-Tac VT-12341, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | V-Tac |
| Model | VT-12341 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27251 MB |
