V-Tac VT-12151 handleiding

46 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 42 van 46
___________________________________________
41
5.2.2 Battery parameter settings on the inverter
If your inverter do not have communication function with OHS-100 battery pack, please set
inverter follow next data.
Max Charging(module) Voltage: 56.0V*N
Shut Down(cut off) Voltage: 49.0V*N
SOC20%
Shut Down(cut off) SOC: 20%
Restart Voltage: 51.2V*N
Max Charge Current: 50A
Max Discharge Current: 50A
6. Installation and Configuration
6.1 Battery system usage and operation instructions
After completing the electrical installation, follow these steps to start the battery system.
1. Open the BMS on/off, wait the screen open and show battery with normal status.
2. After the LCD screen show battery with normal status, open the air switch.
1. After pressing the power button, if the LCD screen show battery with ALM status,
please refer to the "6.2 Alarm description and processing ". If the
failure cannot be eliminated, please contact the dealer timely.
2. Use a voltmeter to measure whether the voltage of the circuit breaker battery access
terminal is higher than48V*N, and check whether the voltage polarity is consistent with
the inverter input polarity. If the circuit breaker battery input terminal has a voltage
output and is greater than 48V*N, then the battery begun to work normally.
3. After confirming that the battery output voltage and polarity are correct, turn on the
inverter, close the circuit breaker.
4. Check if the indicator of the inverter and battery connection (communication indicator
and battery access status indicator) is normal. If it is normal, successfully complete the
connection between the battery and the inverter. If the indicator light is abnormal,
please refer to the inverter manual for the cause

Bekijk gratis de handleiding van V-Tac VT-12151, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkV-Tac
ModelVT-12151
CategorieNiet gecategoriseerd
TaalNederlands
Grootte15636 MB