V-Tac VT-10240W handleiding
Handleiding
Je bekijkt pagina 30 van 57
8 Make Your System Run
28
Check before Running
Step 1. Check whether the cables are connected correctly.
Step 2. Check whether the batteries are grounded.
Step 3. Check these following status of switch.
The power switch of the battery should be off.
The DC switch of the inverter should be off.
The circuit breaker from the inverter to the grid should be off.
Power-on
Step 4. Turn on the DC switch of inverter.
Turn on the switch between the inverter and grid.
Turn on the circuit breaker between the inverter and battery (if any).
Step 5. Turn on the power switch of battery. And waiting for the Run/Alarm
indicator lights from green blinking into green, means power on successfully！
NOTE
· If you want to Power off your system
If you need to shut down the system for some reason, please refer to the following
steps.
Step 1. Turn off the inverter first.
Step 2. Turn off the battery then.
Bekijk gratis de handleiding van V-Tac VT-10240W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | V-Tac |
| Model | VT-10240W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9204 MB |
