V-Tac HEC2-S6.0Hr2 handleiding
Handleiding
Je bekijkt pagina 17 van 64
13 Introduction
There are three basic work modes that end users can choose through inverter APP.
• Self Use:
The energy generated by the solar panels will
be used in the following order: supply to the
home loads; charge the battery and then, feed
into the grid. When the PV power is not
available, the load will be supported by battery
to enhance self-consumption. If the power
grid will support the load demand.
• Back up:
Under this mode, the battery is only used as a
backup power supply when the grid fails, as
long as the grid works, the batteries won’t be
used to power the loads. The battery will get
charged with the power generated by the PV
system or from the grid.
• Peak Saving:
This mode is designed for time-use mode
customer. The customer is able to set up the
charging/discharging time & power via APP.
3.2 Work Modes
User Manual
Hybrid-coupled Storage System – Scheme
Bekijk gratis de handleiding van V-Tac HEC2-S6.0Hr2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | V-Tac |
| Model | HEC2-S6.0Hr2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5991 MB |
