Handleiding
Je bekijkt pagina 46 van 265
3-2
Sending Faxes > Basic transmission procedure
Basic transmission procedure
The basic procedure for using the fax system is explained below.
1
Select [Fax] on the Home screen.
The base screen for fax appears.
2
Place the originals.
For placing originals, refer to the following:
3
Select the transmission method.
There are two transmission methods: memory transmission and direct transmission.
Memory transmission: The original is scanned into memory before communication starts.
Memory transmission is selected by default.
Direct transmission: The destination is dialed and communication starts before the original is
scanned.
Select [Direct] to change the transmission method to direct transmission. The key will be
highlighted on the touch panel. If the [Direct] is selected in the highlighted state,
the transmission method will change to memory transmission.
4
Specifying destination.
Specify the transmission destination.
5
Selecting the functions.
Select the tab, and set transmitting functions that can be used.
Machine’s Operation Guide
Fax Direct Transmission (page 3-30)
Methods For Entering the Destination (page 3-7)
FAX transmission functions (page 3-20)
Bekijk gratis de handleiding van UTAX 6058i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UTAX |
| Model | 6058i |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 24908 MB |
