Handleiding
Je bekijkt pagina 54 van 133
Function Settings
50 Embedded Web Server
POP3 Protocol
Display whether a POP3 connection is available or not. Set to On on POP3 (E-mail
RX) of the Protocol Settings page. If Remote Printing is prohibited, E-mail print-
ing is unavailable. Configure Remote Printing in Printer Settings page.
Check Interval
Displays the interval, in minutes, for connecting to the POP3 server to check for
incoming e-mails at specific interval. Specify the interval of performing checks in the
range from 3 minutes to 60 minutes. The default is 15 minutes.
Run once now
Click Receive button to immediately receive E-mail from the POP3 server. When
Remote Printing is set to Permit, the machine prints the received E-mail.
Domain Restriction
Activate or deactivate to restrict domains. Click Domain List button to configure.
Enter a domain name that is permitted or rejected. You can also specify the E-mail
addresses.
POP3 User Settings
Click Settings button and configure the following user settings. Up to three users
can be set.
1. User Profile 1 (to 3): Enables or disables the user.
2. E-mail Address: Enter the E-mail address.
3. POP3 Server Name: Enter the POP3 server host name or IP address. If you use
the host name, you must first specify the DNS server information.
4. POP3 Port Number: Enter the port number that POP3 will use (default is 110).
Normally, use port 110, but you can change the port number to suit the email
server’s application and operation. For example, the default port number for POP3
over TLS is 995.
5. POP3 Server Timeout: Enter the timeout in seconds during which this machine
tries to connect to the POP3 server.
6. Login User Name: Enter the login name of the user for the POP3 account.
7. Login Password: Enter the password to log in the POP3 account.
8. Use APOP: Enables or disables APOP. APOP is an encryption mechanism used
for encrypting the Login Password during communication with the POP3 server.
When Use APOP is Off, the Login Password is sent using plain ASCII text. When
Use APOP is On, the Login Password is encrypted, therefore cannot be read.
APOP requires that the POP3 server supports APOP, and has APOP enabled.
9. POP3 Security: Enables or disables POP3 Security. When this protocol is
enabled, either TLS or STARTTLS
must be selected. To en
able
POP3 security,
the POP3 port may have to be changed according to the server settings.
10.Connection Test: This will test one transmission for each press, attempting to
establish communication with the POP3 server.
11. Delete e-mail after retrieval: Enables or disables the Delete E-mail after retrieval
function. When this item is set to On, the retrieved E-mail is deleted from the
POP3 server. When this item is set to Off, the E-mail will not be deleted after
retrieved from the POP3 server.
12.E-mail Size Limit: Enter maximum E-mail size in kilobytes. When the value is 0,
the limitation for E-mail size is disabled.
13.Cover Page: Specifies whether to print the body of an E-mail in addition to the
attached files. When this item is set to On, the attached files and the body of an E-
mail are printed. When no attached files exist, only the body of an E-mail is printed.
When this item is set to Off, only the attached files are printed. When no attached
files exist, nothing is printed.
Bekijk gratis de handleiding van UTAX 6009ci, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UTAX |
| Model | 6009ci |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 11339 MB |
