Handleiding
Je bekijkt pagina 80 van 133
Network Settings
76 Embedded Web Server
2. Set IP Filters (IPv4) to On.
3. Select Allowed or Denied as Filter Type.
4. Select On or Off of Always Allow ICMP.
When Always Allow ICMP is set to On, ICMP function takes precedence even if IP
Filter (IPv4) is set to On. On the other hand, when setting to Off, the IP filter settings
are applied as they are.
5. Click Settings button. The IP Filters (IPv4) page opens.This section includes the
following items for configuration.
Network Interface
Select Wired Network, Wi-Fi and Wi-Fi Direct as the available network for IP Filter
(IPv4).
IP Address (IPv4)
Specifies the IP address or network address to be permitted. For example, if you
want to allow access to 192.168.100.XX as IP addresses, including
192.168.100.88, specify 192.168.100.0.
Subnet Mask
Specifies the subnet mask to be permitted. When there are no entries, access is
allowed to all.
To allow access to a network, enter the network IPv4 address, and the subnet mask.
An example of the data format for the .CSV file is: To permit access from all hosts on
network 192, enter "192.0.0.0" for the IP address and "255.0.0.0" for the subnet
mask. Subnet mask can be left blank.
To allow access to a single IP address, enter the IPv4 address, and
"255.255.255.255" for the subnet mask.
If you want to allow access to 192.168.100.XX as IP addresses, including
192.168.100.88, enter "255.255.255.0" for the subnet mask.
Protocols
Specifies the protocol by which an access is granted. You can specify multiple pro-
tocols.
Note: ThinPrint appears only when an optional ThinPrint is activated.
6. Click Submit button.
IP Filter (IPv6)
This page allows you to configure IP filters. IP filters restrict access to the machine
based on the IP addresses and protocols.
Specify the IP addresses or network addresses of the hosts to which access is granted.
If nothing is specified on this page, access from all hosts is allowed.
1. Click TCP/IP under Network Settings on the navigation menu. The Network Settings
: TCP/IP page opens.
2. Set IP Filters (IPv6) to On.
3. Select Allowed or Denied as Filter Type.
Bekijk gratis de handleiding van UTAX 5009ci, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UTAX |
| Model | 5009ci |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 11339 MB |
