Handleiding
Je bekijkt pagina 78 van 133
Network Settings
74 Embedded Web Server
2. This section includes the following items for configuration.
IPv6
Specifies whether or not to enable the IPv6 protocol. Select On to use the IPv6 pro-
tocol.
IP Address
TA static IPv6 address can be entered in this field for the device as part of the sys-
tem network settings. Assigns an IPv6 address to the machine network component.
The format of the IPv6 address is a sequence of numbers (128 bit in total) sepa-
rated by colons, e.g. 2001:db8:3c4d:15::1a2c:1a1f.
Prefix Length
Specifies the IPv6 prefix length. It can be a decimal value between 0 and 128.
RA(Stateless)
When the RA(Stateless) is set to On and the network infra-structure provides the
IPv6 address prefix in the Router Advertise information, the IPv6 stateless address
will be generated on the machine.
DHCPv6 (Stateful)
When the DHCPv6(Stateful) is set to On and the network infra-structure provides
the "Managed address configuration", the IPv6 stateful address (128-bit length) will
be assigned to the machine by DHCPv6 server.
Domain Name
Specifies the domain name of the domain to which the machine belongs. You can
enter the domain name when DHCPv6 (Stateful) is turned Off.
DNS Server (Primary, Secondary)
Specifies the IP addresses of the primary and secondary DNS (Domain Name Sys-
tem) servers. When DHCPv6 (Stateful) is turned On and Use DNS Server from
DHCP is selected, you can select to use the DNS server obtained via DHCP. When
DHCPv6 (Stateful) is turned On and Use following DNS Server is selected, you
can enter static DNS server information in the Primary and Secondary fields pro-
vided.
DNS Search Suffix (Primary, Secondary)
Specifies the primary and secondary DNS (Domain Name System) search suffix.
When DHCPv6 (Stateful) is turned On, you can select DNS Search Suffix (Pri-
mary) or Use following DNS Search Suffix. When DHCP/BOOTP is turned On
and Use following DNS Search Suffix is selected, you can enter static DNS
search suffix in the Primary and Secondary fields provided.
DNS over TLS
Select Auto from the drop-down list to automatically configure DNS over TLS.
Select On to communicate using DNS over TLS. Select Off to communicate without
using DNS over TLS.
Bekijk gratis de handleiding van UTAX 5009ci, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UTAX |
| Model | 5009ci |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 11339 MB |
